服務(wù)熱線
13407595633
13407595633 24-hour consultation hotline →
The development of science and technology has led to the emergence of many new types of machinery and equipment around us, which has improved the efficiency of our production. In the field of agricultural production, we have also achieved the goal of mechanized production. Therefore, we also have many agricultural and livestock machinery, Mechanical equipment, its mold is very important in the use, then we will understand what to know about the use of the mold when using these agricultural and livestock machinery wood pellet machine.
The new mold for starting the wood pellet machine should slowly start the granulator equipped with the new mold. The variable speed drive of the feeder is adjusted to the lowest setting to flow into the mold through the conditioner at the lowest feed rate. The condensate from the steam supply line is discharged to prevent the water mass from entering the tempering chamber. Each of the motors includes a main motor motor and a feeder motor. Do not add steam when starting the ring granule mold to allow the mold hole to be filled with dry material. Check the ammeter for measuring the main motor load. If the full load is not reached, increase the feeder speed until it is displayed. At this point, the steam valve is slightly opened and the amount of current is reduced in a few seconds. If the amount of current drops, increase the speed and repeat the increase until it reaches 80%-90% of the maximum load. When the steam valve is opened, the amount does not drop immediately, because it takes a few seconds for the material to reach the wood pellet machine mold to have any effect on the power required for granulation. The granulator was operated for 2 hours at this reduced load feed to heighten the mold holes and then adjust the granulator to full load.
There is a lot of knowledge about the use of these farming and animal husbandry machinery. If you are using the ring mold wood pellet machine, you will not notice these use matters, which will affect our production efficiency and the whole wood pellet machine. The damage, so when we use these farming and animal husbandry machinery, we must learn more about the relevant use knowledge, master the correct use method, in order to effectively improve the use of the entire farming machinery.